Outdoor IP67 GPS Antenna 1575.42 MHz 34 dB N Connector

• Output: Antenna
• Applicaiton: Electronic
• Product Name: GPS Attenna
• Frequency: 1575.42 MHz
• V.S.W.R: 2.0 :1 Max
• Polarization: Rhcp
• Model NO.: HD-GPSA0104
• Impedance: 50 Ohm
• Half-Power Beam Width: 110+/-10
• Axial Ratio: <=5 dB
• Phase Center Erro: < 2 mm
• Maximum Input Power: 10W
• Service: Support OEM&ODM Order
• Transport Package: 1PC/Polybag or Customized
• Trademark: ROMTRONIC
• Origin: China
• Production Capacity: 200000

Product Description

Electrical Characteristics

Frequency:  1575.42 MHz
Gain:  0 dBi
V.S.W.R: 2.0:1 Max.
Polarization: RHCP
Impedance: 50 OHM
Half-power beam width: 110+/-10
Axial Ratio:<=5 dB
Phase Center Error: < 2 mm
Maximum input power: 10W

LNA Spec.
Frequency:  1575.42 MHz
Gain:  34 dBi
Passband Ripple: <=2 dB
Noise Figure(dBi): ≤1.9(typical),≤2.5(Max)
V.S.W.R: 2.0:1 Max.
Out-band Rejection(dB):
1575.42±30MHz    >12 dB
1575.42±50MHz    >35 dB
1575.42±100MHz   >70 dB
Differential Transmission Delay(ns): <=5
Voltage(V): 4-6
Current(mA): <=45

Material & Mechanical Characteristics

Dimension: Ф85*55mm
Connector: N Connector
Weight:  1.0 Kg

Environmental

Operation Humidity: <95%
Operation Temperature: - 40 ˚C ~ + 65 ˚C
Storage Temperature: - 40 ˚C ~ + 80 ˚C

1. Are you the manufacturer?
Yes. We have specialized in manufacturing high quality cable assembly and wire harness for more than 25 years.
2. If I don't have any drawings, can you still quote my products?
Yes. You can send us photos or samples together with your SPEC, we will quote to you ASAP.
3. Can you supply OEM & ODM service?
Yes. We have customized 34,000+ kinds of cables for our partners up to now, we are very experienced in customizing & producing any cables you need.

4. Can you provide samples?
Yes, the sample is available to provide for testing or checking quality before bulk ordering. Most of the samples are free(depends on kinds and quantity), but always need you pay for shipping cost.
5. How does your factory control quality?
100% check for every production step. 200% full inspection for finished product: 1st when finished, 2nd before shipment.
6.What is your lead time for mass production?
It depends on order quantity and product material. Normal lead time is around 3-5 weeks